Products

The EVRaceworks variable Battery Charger: Optimized for 72V Li-Ion Batteries: Max charge voltage set at 84V, designed for 72V Li-Ion batteries. Informative Display: Digital display shows battery voltage and charge rate in real-time. Universal Compatibility: CNLinko LP20 Plug works with all EVR batteries and select 72V Surron batteries. Plug in Anywhere: The...

The EVRaceworks variable Battery Charger: Optimized for 72V Li-Ion Batteries: Max charge voltage set at 84V, designed for 72V Li-Ion batteries. Informative Display: Digital display shows battery voltage and charge rate in real-time. Universal Compatibility: CNLinko LP20 Plug works with all EVR batteries and select 72V Surron batteries. Plug in Anywhere: The...

Bootleg pro tapers...but they pretty nice anyways.

Spare battery for KX-e conversion kit.  Includes 5A variable charger

This master cylinder can be used as both a clutch and left hand brake.  Outstanding build quality and finish, as you'd expect from Brembo. Found on KTM's as the stock clutch lever. Can be purchased as an upgrade for the Surron Budget Rear Moto Brake 10mm Piston M10x1.0 Thread for...

Replacement pads for the Budget Surron Rear Moto Brake Great quality and long-lasting, these things beat mountain bike brakes all day.   *Ships once budget rear moto brake kits begin shipping* Mid-Feb

The final word in Talaria rear brakes.  Hopefully you're seeing this before wasting money on another set of inadequate mountain bike brakes.  This contains everything you need to get a legit rear hand brake setup. Motorcycle master cylinder and caliper.  Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear...

Ditch the hand brake for your surron and get this moto foot brake!  Everything required to get some serious stopping power and a solid, dirt-bike feeling foot brake. Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear patch.  Motorcycle brake line.  Brackets custom for Surron Lite bee X. Foot master...

The final word in Surron rear brakes.  Hopefully you're seeing this before wasting money on another set of inadequate mountain bike brakes.  This contains everything you need to get a legit rear hand brake setup. Motorcycle master cylinder and caliper.  Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear...

The familiar DKD display compatible with Votol controllers, pre-wired for use as-seen in the EVRaceworks KX-e conversion or your own DIY project.  Select from handle bar mounts for 7/8" or 1-1/8" handlebars.  Clamps on to handlebars with included hardware. Wired with a 3-pin Deutsch DTM connector Pin 1 - Battery...

Full screen mount for DKD display.  Hardware included.  7/8" bars are typical.

This part of the screen mount is designed to break before the screen itself if you take a spill.  Hardware included.  7/8" bars are typical.

The final word in Talaria rear brakes....Times TWO.  Same parts from the Talaria Rear Moto Brake, but now with a foot brake as well.  Run two calipers on the rear rotor giving you a moto foot brake & moto hand brake simultaneously.  This contains everything you need to get up...

The final word in Surron rear brakes....Times TWO.  Same parts from the Surron Rear Moto Brake, but now with a foot brake as well.  Run two calipers on the rear rotor giving you a moto foot brake & moto hand brake simultaneously.  This contains everything you need to get up...

Bolts on to the Surron LBX or Talaria MX3/MX4 foot brake brackets to give a little more length on your foot brake lever.   Allows for more precise actuation and more comfortable fitment for people with big feet. Includes 2x screws required for mounting Compatible with: MX3/MX4 Footbrake Bracket Surron LBX...

The perfect solution for riders looking to buy a high-performance electric dirt bike, but can’t justify the price of a brand new electric dirt bike from other manufacturers. No need to settle for cheap imports or an inferior conversion kit.  This kit is an all-in-one solution to get you on...

This master cylinder is used in our budget moto brake kit for the surron.   Compatible with DOT3, DOT4, or DOT5.1 brake fluid Adjustable lever position Fits M10 Banjo fitting 10mm internal piston Handle length 5" (from pivot)

This caliper is found in the Surron Rear Moto Brake kit .  Dual 25mm piston floating caliper Custom mounting bracket Cheap replacement pads M10 Banjo Bolt Fits up to 4mm thick rotors. This does not mount up directly to a stock surron MTB bracket, additional brackets are required and are...

If you're ready to upgrade your surron's rear brake rotor to 220mm diameter to get a little more stopping power, you're gonna need this taller brake caliper bracket. This machined aluminum design adds additional strength and style points over the stock one. Fits aftermarket calipers with typical 74mm spacing. For...

A dual rear brake caliper bracket that works with 220mm rotors!  No more need for those ugly spacers.  This purpose built caliper bracket was made for stunters and off-roaders alike.  Direct bolt in for the Surron Light Bee. Colors may vary slightly from the picture For MTB style brakes only. ...

This is the barebones foot brake bracket as found in the talaria dual caliper rear moto brake  Made specifically for the Talaria MX3/MX4. Includes: Master Cylinder (Dot 3, 4, or 5.1) Foot peg bracket with lever Hardware and optional spring Brake line for mountain bike brakes (this line is not shown...

If you want a twist throttle on your Onyx LZR PRO, look no further.  Contains the required wiring harness and twist throttle.  Check out RunPlayBack's video below for installation tips. Wire harness has additional plug for a handle bar mounted display (not included), and 6v power for accessories/lights. This is...

  Note: 6/17/24, stocked motor is the NEW version of the 138 70H V3, it looks slightly different from photos and has a couple minor design changes. The famous QS 138 70H V3 is a perfect blend of power, durability, versatility and value.  Delivering impressive performance as shown in the...

The QS-10S anti-spark connector is rated for 180A continuous.  This is the main battery connector used in the EVRaceworks KX-e conversion kit.   Sold as a male/female set with 2x wire covers. 4x auxiliary electrical connections great for BMS CAN communication or other lower current applications Requires very heavy duty (250W+)...

The Rerode R1 just landed.  The foundational inspiration is apparent, but this bike is miles different from anything on the market.  Boasting 72v, 8000w performance and an overhauled frame and rear suspension. All designed with your comments and critique in mind.  Gas moto riders will see the similarities in suspension...

If you already have mountain bike brakes in the rear of your surron that you're happy with, but are after a really powerful moto footbrake, this is the solution.   This is the upgrade that allows you to continue running a MTB rear hand brake but add on a motorcycle style...

Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear patch. Designed for fitment on Surron Light Bee. Increased stopping power - more contact area Less Fade - thicker rotor helps dissipate heat and reduces warping Not compatible with Warp9 hubs.  Not compatible with stock brake calipers - caliper will...

This is the barebones foot brake bracket as found in the dual caliper surron rear moto brake Includes: Master Cylinder (Dot 3, 4, or 5.1) Foot peg bracket with lever Hardware and optional spring Brake line for mountain bike brakes (this line is not shown and is not compatible with moto...

Replace the wobbly (or broken) plastic battery cover risers with the these durable machined aluminum risers.  Sold as a set of two.  Re-use hardware from the original plastic risers. Colors may vary slightly from photos. Compatible with Chi batteries and other aftermarket batteries that use the mid height riser (43mm center-center) They...

You already purchased the single caliper Budget Surron Rear Moto Brake and LOVE it.  Now you wish you had purchased the entire Dual Caliper Surron Rear Moto Brake.  This is the upgrade from the single to the dual, only including the additional components required for the upgrade. Components Included in...

The perfect line for Moto footbrake setups on the Surron Light Bee X.  Both ends take a 10mm banjo bolt.   This line is included in the Dual Caliper Surron Rear Moto Brake kit. One end is a 45 degree lateral bend (master cylinder) One end is a 20 degree inline...

Premium Spiegler Performance brake line as found in the Budget Surron Rear Moto Brake kit.  These brake lines are incredibly durable and greatly contribute to outstanding brake feel.  Zero hydraulic stretch and high quality fittings.  Both fittings can rotate up to 180 degrees with the included tools. 1600mm length -...

Premium Spiegler Performance brake line as found in the Brembo version of the Budget Surron Rear Moto Brake kit.  These brake lines are incredibly durable and greatly contribute to outstanding brake feel.  Zero hydraulic stretch and high quality fittings.  Both fittings can rotate up to 180 degrees with the included...

Has mounting for one MTB brake caliper and one EVR Moto Caliper

Short-sized battery cover risers for Surrons with aftermarket batteries.  These machined aluminum brackets come as a pair and replace the questionable plastic ones.   Compatible with Chi batteries and other aftermarket batteries that use the shortest battery cover riser (27mm center-center) Re-use hardware from the original plastic risers. Colors may vary slightly from...

The tall-sized battery cover risers for Surrons are here!  These machined aluminum brackets come as a pair and replace the questionable plastic ones on aftermarket batteries Compatible with Chi batteries and other aftermarket batteries that use the tallest battery cover riser (73mm center-center) Re-use hardware from the original plastic risers. Colors may vary...

Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear patch. Designed for fitment on Talaria MX4, XXX, MX3. Increased stopping power - more contact area Less Fade - thicker rotor helps dissipate heat and reduces warping Not compatible with Warp9 hubs.  Not compatible with stock brake calipers - caliper...

This is the USB adapter to program Votol motor controllers from your PC.  Votol software is available for download for free.  Sometimes it can be a trick to get your PC to connect properly to the motor controller but this troubleshooting guide has a pretty good track record.