ALL PRODUCTS

Replace the wobbly (or broken) plastic battery cover risers with the these durable machined aluminum risers.  Sold as a set of two.  Re-use hardware from the original plastic risers. Colors may vary slightly from photos. Compatible with Chi batteries and other aftermarket batteries that use the mid height riser (43mm center-center) They...

The final word in Surron rear brakes.  Hopefully you're seeing this before wasting money on another set of inadequate mountain bike brakes.  This contains everything you need to get a legit rear hand brake setup. Motorcycle master cylinder and caliper.  Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear...

Finally- a dual rear brake caliper bracket that works with 220mm rotors!  No more need for those ugly spacers.  This purpose built caliper bracket was made for stunters and off-roaders alike.  Direct bolt in for the Surron. Colors may vary slightly from the picture For MTB style brakes only.  Not...

The final word in Surron rear brakes....Times TWO.  Same parts from the Surron Rear Moto Brake, but now with a foot brake as well.  Run two calipers on the rear rotor giving you a moto foot brake & moto hand brake simultaneously.  This contains everything you need to get up...

The tall-sized battery cover risers for Surrons are here!  These machined aluminum brackets come as a pair and replace the questionable plastic ones on aftermarket batteries Compatible with Chi batteries and other aftermarket batteries that use the tallest battery cover riser (73mm center-center) Re-use hardware from the original plastic risers. Colors may vary...

If you want a twist throttle on your Onyx LZR PRO, look no further.  Contains the required wiring harness and twist throttle.  Check out RunPlayBack's video below for installation tips. Wire harness has additional plug for a handle bar mounted display (not included), and 6v power for accessories/lights. This is...

Beefy 3mm thick, 220mm stainless steel rotor with enlarged wear patch. Designed for fitment on Surron Light Bee. Increased stopping power - more contact area Less Fade - thicker rotor helps dissipate heat and reduces warping Not compatible with Warp9 hubs.  Not compatible with stock brake calipers - caliper will...

Short-sized battery cover risers for Surrons with aftermarket batteries.  These machined aluminum brackets come as a pair and replace the questionable plastic ones.   Compatible with Chi batteries and other aftermarket batteries that use the shortest battery cover riser (27mm center-center) Re-use hardware from the original plastic risers. Colors may vary slightly from...

This master cylinder is used in our budget moto brake kit for the surron.   Compatible with DOT3, DOT4, or DOT5.1 brake fluid Adjustable lever position Fits M10 Banjo fitting 10mm internal piston Handle length 5" (from pivot)

Replacement pads for the Budget Surron Rear Moto Brake Great quality and long-lasting, these things beat mountain bike brakes all day.   *Ships once budget rear moto brake kits begin shipping* Mid-Feb

This is the barebones foot brake bracket as found in the dual caliper surron rear moto brake Includes: Master Cylinder (Dot 3, 4, or 5.1) Foot peg bracket with lever Hardware and optional spring Brake line for mountain bike brakes (this line is not shown and is not compatible with moto...

If you're ready to upgrade your surron's rear brake rotor to 220mm diameter to get a little more stopping power, you're gonna need this taller brake caliper bracket. This machined aluminum design adds additional strength and style points over the stock one. Fits aftermarket calipers with typical 74mm spacing. For...

This caliper is found in the Surron Rear Moto Brake kit .  Dual 25mm piston floating caliper Custom mounting bracket Cheap replacement pads M10 Banjo Bolt Fits up to 4mm thick rotors. This does not mount up directly to a stock surron, additional brackets are required and are included in...

Premium Spiegler Performance brake line as found in the Budget Surron Rear Moto Brake kit.  These brake lines are incredibly durable and greatly contribute to outstanding brake feel.  Zero hydraulic stretch and high quality fittings.  Both fittings can rotate up to 180 degrees with the included tools. 1600mm length -...

You already purchased the single caliper Budget Surron Rear Moto Brake and LOVE it.  Now you wish you had purchased the entire Dual Caliper Surron Rear Moto Brake.  This is the upgrade from the single to the dual, only including the additional components required for the upgrade. Components Included in...

Bootleg pro tapers...but they pretty nice anyways.

This is the USB adapter to program Votol motor controllers from your PC.  Votol software is available for download for free.  Sometimes it can be a trick to get your PC to connect properly to the motor controller but this troubleshooting guide has a pretty good track record.

Full screen mount for DKD display.  Hardware included.  7/8" bars are typical.

The perfect solution for riders looking to buy a high-performance electric dirt bike, but can’t justify the price of a brand new electric dirt bike from other manufacturers. No need to settle for cheap imports or an inferior conversion kit.  This kit is an all-in-one solution to get you on...

  Note: 6/17/24, stocked motor is the NEW version of the 138 70H V3, it looks slightly different from photos and has a couple minor design changes. The famous QS 138 70H V3 is a perfect blend of power, durability, versatility and value.  Delivering impressive performance as shown in the...

Spare battery for KX-e conversion kit.  Includes 5A variable charger

Sur-Ron Axle For Wheelie Machine Custom axle with 60 degree dimples machined on center for use on wheelie practicing machines or other applications.  As-seen in RunPlayBack’s youtube video Custom Surron Wheelie Machine Full Review and Demo    https://www.youtube.com/watch?v=o461vJqFNHU&t=443s

Premium Spiegler Performance brake line as found in the Brembo version of the Budget Surron Rear Moto Brake kit.  These brake lines are incredibly durable and greatly contribute to outstanding brake feel.  Zero hydraulic stretch and high quality fittings.  Both fittings can rotate up to 180 degrees with the included...

The perfect line for Moto footbrake setups on the Surron Light Bee X.  Both ends take a 10mm banjo bolt.   This line is included in the Dual Caliper Surron Rear Moto Brake kit. One end is a 45 degree lateral bend (master cylinder) One end is a 20 degree inline...

The EVRaceworks variable Battery Charger: Optimized for 72V Li-Ion Batteries: Max charge voltage set at 84V, designed for 72V Li-Ion batteries. Informative Display: Digital display shows battery voltage and charge rate in real-time. Universal Compatibility: CNLinko LP20 Plug works with all EVR batteries and select 72V Surron batteries. Plug in Anywhere: The...

This part of the screen mount is designed to break before the screen itself if you take a spill.  Hardware included.  7/8" bars are typical.

The QS-10S anti-spark connector is rated for 180A continuous.  This is the main battery connector used in the EVRaceworks KX-e conversion kit.   Sold as a male/female set with 2x wire covers. 4x auxiliary electrical connections great for BMS CAN communication or other lower current applications Requires very heavy duty (250W+)...

A direct bolt-on chainguard cover for the old version of QS 138 70H V3. Does not fit the updated design from QS. Anodized aluminum for durable finish. Includes standoffs and hardware.  Replaces three of the screws on the motor cover.

The familiar DKD display compatible with Votol controllers, pre-wired for use as-seen in the EVRaceworks KX-e conversion or your own DIY project.  Select from handle bar mounts for 7/8" or 1-1/8" handlebars.  Clamps on to handlebars with included hardware. Wired with a 3-pin Deutsch DTM connector Pin 1 - Battery...

The EVRaceworks variable Battery Charger: Optimized for 72V Li-Ion Batteries: Max charge voltage set at 84V, designed for 72V Li-Ion batteries. Informative Display: Digital display shows battery voltage and charge rate in real-time. Universal Compatibility: CNLinko LP20 Plug works with all EVR batteries and select 72V Surron batteries. Plug in Anywhere: The...